Questions & Answers
TESTIMONIALS
"We have an account in Kentucky at a nursing home far from our location in Detroit. The first time our client called it had only been 6 weeks since the high volume coffee machine was installed and there was a leak problem. After that was resolved, they complained about a scale problem which was occurring continuously every 4-5 weeks. Because of the distance between our locations, we had to hire a service company to go to their location and clean the machine. This became very costly because each service call is about $150. It got to the point where we had to replace the machine and install a Scale Interceptor on the new machine.
This new installation left the machine completely scale free. The machine was installed for 9 months and
when it was evaluated again, scale was no where to be found. It was as if the machine had just been cleaned."
“Of my 27 years in this business I was skeptical that it was ‘just another magnet powered product.’
The testing of the Scale Interceptor has proven it to be a remarkable device. Give it a try or give me a call.”
The Four ABSOLUTE MUSTS!
1. MUST use clean, filtered water
2. MUST be sized properly (flow rate)
3. MUST be grounded to ground connector supplied
4. MUST use proper flow direction
beverage equipment. The Scale Interceptor should be installed on a clean machine so that the
breakdown of existing deposits doesn’t harm or cause problems to the machine.
This reduces the adhesive bond between dissolved (calcium and magnesium) minerals in your
water as it passes through your equipment. The result is maintenance-free, scale-free
equipment.
affect the performance of the Scale Interceptor. Additionally, quality water enhances the taste of
all beverages.
available from the water treatment facility. OR TEST STRIPS ARE
AVAILABLE FROM HHD
minerals in it, commonly called lime.
dynamics of the scale crystal to form a rhomboid or round soft calcite
crystal rather than the typical linear orthorhombic aragonite hard linear
crystal. The specific density of this change and brinell hardness factors
are both scientifically measurable.
taste/odor problems exist, also use activated carbon filtration.
in the water so it may enhance the brew flavor.
contacts the negative polarity water pipe it tends to be repelled (like
polarity fields repel each other ) so physical bonding of the minerals to
the piping is reduced or eliminated.
clarify tea but WILL keep brewer scale free. Best to use low mineral
content, distilled water or water softener resin.
water areas of the world with 100% excellent results when properly installed.
"We have an account in Kentucky at a nursing home far from our location in Detroit. The first time our client called it had only been 6 weeks since the high volume coffee machine was installed and there was a leak problem. After that was resolved, they complained about a scale problem which was occurring continuously every 4-5 weeks. Because of the distance between our locations, we had to hire a service company to go to their location and clean the machine. This became very costly because each service call is about $150. It got to the point where we had to replace the machine and install a Scale Interceptor on the new machine.
This new installation left the machine completely scale free. The machine was installed for 9 months and
when it was evaluated again, scale was no where to be found. It was as if the machine had just been cleaned."
-Randy Sandborn (Ryder Coffee)
“Of my 27 years in this business I was skeptical that it was ‘just another magnet powered product.’
The testing of the Scale Interceptor has proven it to be a remarkable device. Give it a try or give me a call.”
-Butch Winkler (Holiday House)
IMPORTANT
Must be installed on a clean (scale free)
machine with a water filter
Must be installed on a clean (scale free)
machine with a water filter
The Four ABSOLUTE MUSTS!
1. MUST use clean, filtered water
2. MUST be sized properly (flow rate)
3. MUST be grounded to ground connector supplied
4. MUST use proper flow direction
What Does The Scale Interceptor Do?
The Scale Interceptor prevents the development of future scale
on commercial water and beverage equipment. The Scale Interceptor should be installed on a clean machine so that the
breakdown of existing deposits doesn’t harm or cause problems to the machine.
How Does It Work?
The Scale Interceptor is a permanently energized ionic inducer
composed of rare earth metals. This reduces the adhesive bond between dissolved (calcium and magnesium) minerals in your
water as it passes through your equipment. The result is maintenance-free, scale-free
equipment.
Do I Need A Water Filter?
Yes! Clean filtered water is a MUST! Water containing any
contaminants and sediment can affect the performance of the Scale Interceptor. Additionally, quality water enhances the taste of
all beverages.
Q. What are the best areas for noticeable scale reduction?
A. Where the supply water is harder than 5 grains/gallon hard.
Q. Where will I find this hardness factor?
A. Local water treatment professionals will know this or the
information is available from the water treatment facility. OR TEST STRIPS ARE
AVAILABLE FROM HHD
Q. What is hard water?
A. Water that contains substantial amounts of calcium carbonate
(CaCO3 ) minerals in it, commonly called lime.
Q. What does the Scale Interceptor do to this "lime" mineral to keep it
from
scaling up the equipment?
A. The permanent energy field in this ionic induction device
changes the scaling up the equipment?
dynamics of the scale crystal to form a rhomboid or round soft calcite
crystal rather than the typical linear orthorhombic aragonite hard linear
crystal. The specific density of this change and brinell hardness factors
are both scientifically measurable.
Q. Where is the best place to install the device?
A. After a water filter, before the heating/chilling component.
Q. Is filtration necessary?
A. Always use at least a 5 micron sediment filter. If chlorine
or other organic taste/odor problems exist, also use activated carbon filtration.
Q. Will the Scale Interceptor do anything to the coffee taste?
A. Tests show that it increases the solubility factor of
ingredients dissolved in the water so it may enhance the brew flavor.
Q. Why is grounding required?
A. It accelerates the negative polarity field in the fluid bed.
When the fluid contacts the negative polarity water pipe it tends to be repelled (like
polarity fields repel each other ) so physical bonding of the minerals to
the piping is reduced or eliminated.
Q. What about its application for tea brewers?
A. Mineral content in water turns tea cloudy, Scale Interceptor
will NOT clarify tea but WILL keep brewer scale free. Best to use low mineral
content, distilled water or water softener resin.
Q. Is this just another unproven idea?
A. No. This product has been time tested for over 25 years in
most hard water areas of the world with 100% excellent results when properly installed.
